First Class Wiring 2 4 Ohm Subs

Stable at 1 ohm mono.

Wiring 2 4 ohm subs. This is pretty simple too. Stable at 4 2 or 1 ohm mono. If you want to use 3 subs you can wire the reference 1262w voice coils each in series for 8 ohm each and do the same for the comp vr dvc.

This will give 2 ohms total. It is a traditional method of wiring that works very well. This is a basic way in which you can wire a dual 4 ohm subwoofer to a 2 ohm load.

Subwoofers have different impedances dual 4 ohm single 2 ohm etc that change your wiring options when you add or subtract woofers. The sub will be wired in parallel to achieve this impedance ohm. Otherwise the only safe way to wire your gear together is.

Ok you have 4 coils of wire that are 4ohms each. Your amp won t like this and will probably shut down or overheat. If you want 2 channels at 1 ohm than you ll need 2 ohm subs to make it work.

The final impedance of your subwoofer must match the acceptable impedances of your amplifier with 4 ohm and 2 ohm being the most common final impedances. If you can exchange those 2 ohm models for the 4 ohm versions you d be better off. Lorenzo shows you how to wire two dual voice coil 4 ohm subwoofers at your amplifier to a 1 ohm or 4 ohm load matching subwoofers and amplifiershttps www y.

Two svc drivers with voice coils in parallel. In this example he takes two 4 ohm subwoofers and wires them down to a 1 ohm load to the. Option 1 parallel parallel 1 ohm load voice coils wired in parallel speakers wired in parallel recommended amplifier.