Nice 4 Wires On Light Switch

Assuming it is a steel box.

4 wires on light switch. Wiring a one way switch. Terminate the black wire that goes to the light fixtures to the top screw of the light switch. Secure the switch to the box with the screws provided and install the cover plate.

Which is called a pigtail connecting to the silver screw on the pull chain fixture. The common terminal. A light switch has 4 wires sometimes 2 white and 2 black wires.

The whites are connected together with a short third wire. White wire this is the neutral wire. First of all we should connect the ground wires to the box.

Ceiling fan switch 3 speed 4 wire zing ear ze 268s6 pull chain switch control replacement 3 speed control switch ceiling fans wall lamps cabinet light. The instructions below are based on the most commonly used method. If the light switch has a ground screw on it usually green and at the bottom of the switch connect it now.

The blacks are also connected to each other with a short wire another pigtail to the brass screw on the fixture. The black and red wires running between the boxes are connected to the travelers on each switch. You should have a fully illuminated room.

Step 15 turn the power on to the light circuit and switch the lights on. At the light the white wire connects to the neutral terminal and the black wire connects to the hot. Red wire this wire is used for 3 or 4 way switches and will connect the switches together so they can each control your lights.